Simple Webp Images

Description

This plugin helps to increase site speed, and helps to improve scores in Google’s Pagespeed Insights tool by addressing the common recommendation “Serve next-gen image formats”.

For the best speeds, Google recommends using new image formats such as .webp, which offer smaller file sizes than common formats such as .jpg or .png with no visible loss in quality. However, not all internet browsers support the .wepb image format, so only using that format would result in broken images in older browsers.

This plugin addresses that problem, and allows your site to use .webp images when it can. This plugin will convert images from .jpg or .png automatically, and save .webp versions of the image alongside the original. When a user visits the site in a compatible browser, they will be shown the .webp versions of all images, making your site load faster and improving your scores in Google Pagespeed Insights. Users on older browsers that aren’t compatible with .webp images will be shown the .jpg or .png versions of the images instead.

When first installing the plugin, run the Bulk Converter to convert all your existing images. See the Installation section for instructions.

After installation, any .jpg or .png image uploaded to the Media Library will be automatically converted.

Settings

  • Conversion quality – Controls the level of compression on the generated .webp images. The lower the value, the smaller the file size of the generated images, but the more chance there is of a visual degradation of quality. The quality value to be entered is a percentage – by default, this is set at 80%. Most users won’t need to change this.

  • HTML Output Buffering – This allows the plugin to perform a find-and-replace on the HTML that WordPress has generated for output to the browser to replace image tags. This tends to perform the image tag replacement more reliably, but can cause issues with some themes. Users are advised to have this setting turned on, but they should check that the site is displaying as it should, and turn this option off if any issues arise.

  • Exclude pages from HTML output buffering – To specify pages that should be excluded from the HTML Output Buffering settings

  • Lazy loading – This improves the site speed further by not loading images that are further down the page until the user has scrolled down to them. This saves time downloading images that the user hasn’t got to yet, or might not get to at all. Users are advised to have this setting turned on, but they should check that the site is displaying as it should, and turn this option off if any issues arise.

  • Exclude image classes from lazy-loading – To specify images, by class name, that should not have the lazy-loading applied

Developers

If using Simple Webp Images with your custom themes or plugins, there’s a couple of filters you can use, as below.

  • simple-webp-images-exclude-from-output-buffering filter

Use this to exclude pages or posts from the HTML output buffering via apply_filters, using any critera you need. Call the filter, run any checks you need, and return ‘true’ to exclude the current page or post from the buffering.
Example:

apply_filters( 'simple-webp-images-exclude-from-output-buffering', 'exclude_page_with_id_100_from_output_buffering' );
function exclude_page_with_id_100_from_output_buffering( $is_excluded ) {
    if( get_the_id() == 100 ) {
        return true;
    }

    return false;
}

The example code could be placed in your functions.php file.

  • simple-webp-images-exclude-from-lazy-loading filter

Use this to exclude pages or posts from the image lazy loading via apply_filters, using any critera you need. Call the filter, run any checks you need, and return ‘true’ to exclude the current page or post from the lazy loading.
Example:

apply_filters( 'simple-webp-images-exclude-from-lazy-loading', 'exclude_page_with_id_100_from_lazy_loading' );
function exclude_page_with_id_100_from_lazy_loading( $is_excluded ) {
    if( get_the_id() == 100 ) {
        return true;
    }

    return false;
}

The example code could be placed in your functions.php file.

Installation

This section describes how to install the plugin and get it working.

e.g.

  1. Install the plugin through the WordPress plugins screen directly, or download the .zip file, and upload it by going to Plugins -> Add New -> Upload .zip file.
  2. Activate the plugin through the ‘Plugins’ screen in WordPress
  3. Use the Bulk Converter to convert all existing images to .webp. Go to Settings -> Simple Webp Images, and click the Start Bulk Conversion button at the bottom. The plugin will count all the images, and start processing them 10 at a time. Leave the page open until the conversion is completed.
  4. Configure other plugin settings on the plugin settings page, at Settings -> Simple Webp Images. See below for a description of the available settings.

FAQ

My site doesn’t display correctly with HTML Output Buffering turned on – what should I do?

If certain pages don’t display correctly, but the rest of the site does, exclude the problem pages from the output buffering on the plugin settings page, under Settings -> Simple Webp Images.
If it’s the majority of the site that doesn’t display correctly, turn off the setting and send me a message describing the issue that you saw – I’ll try to issue a fix and come back to you!

Reviews

Enero 15, 2021 1 reply
Hi! I just wanted to leave a review because I saw the lack of reviews and the other non-descriptive review, and because I have been using this plugin for maybe about a year now and have no issues– working out of the box on Litespeed servers.
Setyembre 13, 2020
don’t work, i have png images, after converting nothing changes
Enero 20, 2020
Installed on two sites so far, very impressed! Lightweight, easy to set up and also compatible with WPEngine. Nice clean UI for bulk converting existing images too!
Read all 4 reviews

Contributors & Developers

“Simple Webp Images” is open source software. The following people have contributed to this plugin.

Contributors

“Simple Webp Images” has been translated into 1 locale. Thank you to the translators for their contributions.

Translate “Simple Webp Images” into your language.

Interested in development?

Browse the code, check out the SVN repository, or subscribe to the development log by RSS.

Changelog

2.0.0

  • Rewriting to make use of new language features
  • More efficient HTML replacement
  • PHP 8 required

1.3.0

  • Feature – Rewriting element generation to improve efficiency, moving all sized images to separate elements

1.2.1

  • Bugfix – Allowing webp images to be generated when small enough that no sized versions are generated

1.2.0

  • Feature – Allowing exclusion from HTML output buffering and image lazy loading via apply_filters

1.1.18

  • Bugfix – Getting attachment ID from image URL if no other attachment ID is found

1.1.17

  • Bugfix – Preventing HTML output buffering from affecting XML sitemaps, such as those produced by Yoast SEO

1.1.16

  • Bugfix – Preventing select box styling on admin page affecting entire WordPress dashboard

1.1.15

  • Feature – Allowing lazy-loading to be disabled for specified image classes
  • Feature – Allowing HTML Output Buffering to be disabled for specified pages

1.1.14

  • Bugfix – Preventing HTML entities from breaking in buffered content
  • Updating supported version

1.1.13

  • Bugfix – Preventing conflict with Gutenberg, caused by plugin attempting to process json posted by Gutenberg using HTML buffering

1.1.12

  • Bugfix – Updating to use directory separator constant to fix issues on Windows based systems

1.1.11

  • Bugfix – Adding information message to admin page to explain process of temporarily setting Wordfence Firewall to Learning Mode, to avoid issue with blocking of conversion ajax calls.

1.1.10

  • Bugfix – adding check to verify if output buffered string is HTML before attempting to process

1.1.9

  • Adding settings link to plugins page for ease of use

1.1.8

  • Preventing HTML output buffering from affecting wp ajax requests, as this breaks some functionality

1.1.7

  • Sanitizing input/output

1.1.6

  • Bugfix, error with public assets version

1.1.5

  • General bugfixes/stability improvements

1.1.0

  • Adding option for lazy load functionality

1.0.5

  • Adding option for frontend img replacement via HTML output buffering
  • General bugfixes

1.0.0

  • Initial plugin version
  • Bulk conversion of images from settings screen
  • Frontend img replacement via the_content filter